List of verified meters

The following list contains M-Bus meters which had been tested and are fully functional with our Ethernet to M-Bus converters operating in the Smart M-Bus application mode. The list contains examples of readout values in various forms of processing - HTML, XML, XML REST and CSV.

The Ethernet converters in the Smart M-Bus application mode can only process standard M-Bus messages without specific manufacturer defined data formats. Manufacturer specific data can be read only by a direct M-Bus communication with a post processing of the M-Bus response in an upper level of the communication system.
The Smart M-Bus application mode stores responses from the basic data request REQ_UD2.

The compatibility of meters with the M-Bus to RS485 and RS232 converters is not affected and is completely guaranteed. All converters fully comply with the M-Bus specification.

Electricity meters


Electricity meters inepro

PRO1-Mb 0,25-45A Single phase electricity meter for 230V with current measurement up to 45A
compliant with EU MID (Measuring Instruments Directive).
PRO2-Mb 0,25-100A Single phase electricity meter for 230V with current measurement up to 100A
compliant with EU MID (Measuring Instruments Directive).
PRO380-Mb 0,25-100A Three phase electricity meter 3x230V/400V with current measurement up to 100A
compliant with EU MID (Measuring Instruments Directive).
PRO380-Mb CT x/5A Three phase electricity meter 3x230V/400V with indirect current measurement up to 5A compliant with EU MID (Measuring Instruments Directive).
Manufacturer: inepro
Meter type: Electricity meter
Note: M-Bus line load is about 3,3mA. Due to this higher
current load it is possible to connect 2.2 times less inepro electricity meters to the M-Bus converters.
e.g. EthMBus-4SL max. one electricity meter. EthMBus-XL45 max. twenty electricity meters.
Values export: Value exports are the same for all types of these electricity meters
CSV export example
XML export example
XML REST export example
HTML export / meter table

inepro PRO370

Three phase electricity meter 3x230V/400V with current measurement up to 65A. MID (Measuring Instruments Directive) approved meter.
Manufacturer: inepro
Meter type: Electricity meter
Values export: CSV export example
XML export example
HTML export / meter table

Crompton Instruments / TE Connectivity energy meters with DRM-M add-on module

The DRM-M is an optional infra-red communication system for M-Bus by TE Connectivity. It is an add-on module that enables meter readout via M-Bus communication with TE's MID electricity meters. The module is available for the following TE product lines:
- Energy Meter Single-phase, Direct Connection
- Energy Meter Three-phase, CT Operated
- Energy Meter Three-phase, Direct Connection
Not all meters from these lines require this module for M-Bus communication and the verified compatibility currently applies only to communication using the add-on module.
Manufacturer: Crompton Instruments / TE Connectivity
Type of device: M-Bus add-on module for electricity meters
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

Heat meters


Itron CF Echo II

Modular ultrasonic heat meter. Compatibility applies only to meters equipped with the M-Bus communication plug-in board.
Manufacturer: Itron
Plug-in module: M-Bus board
Meter type: Heat meter
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

LandisGyr 2WR5

Heat meter with an ultrasonic flow meter.
Manufacturer: Landis+Gyr
Meter type: Heat meter
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

MULTICAL 66

Heat meter. Can be connected to flow meters. Additional connection for electricity or water meters.
Manufacturer: Kamstrup
Meter type: Heat meter
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

MULTICAL 602

Modular heat meter with flowmeter.
The verified compatibility was tested only on a MULTICAL 602 meter with Wireless M-Bus module with 2 pulse inputs.
Manufacturer: Kamstrup
Meter type: Heat meter
Note: Meter with Wireless M-Bus module. Meter readout performed through Wireless M-Bus Kamstrup concentrator.
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

MULTICAL 603

Modular heat meter with flowmeter.
Latest heat meter with an option to connect an ultrasound flow meter and automatic detection of it.
Wide selection of communication modules and their configurations.
Manufacturer: Kamstrup
Meter type: Heat meter
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table
Different configuration of the M-Bus module

SensoStar 2U

Heat meter with an ultrasonic flow meter.
Manufacturer: Engelmann
Meter type: Heat meter
Note: Warning. The meter is limited to a maximum of 24 communications per 24 hours. After this limit is exceeded the meter stops to communicate entirely.
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

SensoStar U (S3)

Heat meter with an ultrasonic flow meter.
Manufacturer: Engelmann
Meter type: Heat meter
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

Supercal 531

Multi-functional integrator unit suitable for the measurement of heating or cooling flow and for the combined heating/cooling measurement.
Manufacturer: Sontex
Meter type: Heat meter
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

Water meters


Itron water meters with the Itron Cyble M-Bus communications module

M-Bus communication interface module for Itron water meters. Can be fitted to the entire Itron water meter product range: Flodis, Flostar M, Medis Cyble, System MK, System V, Unimag, Unimag Cyble.
Manufacturer: Itron
Type of device: M-Bus add-on module for water meters
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

Sensus water meters with M-Bus communication module Residia ver.2.2

M-Bus communication interface module for Sensus water meters used in ResidiaJet™ water meters.
Manufacturer: Sensus
Type of device: M-Bus add-on module for water meters
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

WEHRLE MODULARIS vodomery s M-Bus modulom

Manufacturer: WEHRLE
Type of device: Water meter with M-Bus module
Note: The data examples below are from basic M-Bus response.
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

Other (S0/M-bus converters etc.)


M-Count 2C

M-Bus pulse adapter with logging for acquisition and handling of pulses from one or two consumption meters with pulse output.
Manufacturer: Cynox
Type of device: Pulse adapter with logging for M-Bus
Note: The adapter offers pulse count parametrization and time tracking. It can calculate measured values from pulses. The readout values depend on the adapter settings and don't necesserily need to be just pulse count.
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

PadPuls M1

M-Bus pulse adapter for acquisition and handling of pulses from a single consumption meter with pulse output.
Manufacturer: Relay
Type of device: Pulse adapter for M-Bus
Note: The meter value has a size of 6 bytes. Conversion to a decimal number takes place only with values of up to 4 bytes = 4.29 x 109 (maximum value). A 6 byte value is always preserved as a hex number.
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table

Siemens AEW21.2

M-Bus pulse adapter for acquisition and handling of pulses from one or two consumption meters with pulse output.
Manufacturer: Siemens
Type of device: Pulse adapter for M-Bus
Values export: XML export example
XML REST export example
HTML export / meter table

Siemens AEW310

M-Bus pulse adapter for acquisition and handling of pulses from one or two consumption meters with pulse output.
Manufacturer: Siemens
Type of device: Pulse adapter for M-Bus
Values export: CSV export example
XML export example
XML REST export example
HTML export / meter table